Dp Dual Trac 20 Assembly Manual Link

Install the horizontal bars through the designated holes in the main posts. If the design utilizes stabilizing plates and requires the posts to form a V-shape, ensure they are properly aligned before proceeding.

If the cables feel slack or droop, adjust the tension by moving the pulleys to alternative adjustment holes on the floating bracket or base frame. Dp Dual Trac 20 Assembly Manual

: Bolt the top horizontal frame member to the main vertical upright. Install the horizontal bars through the designated holes

Two adjustable wrenches (or a socket set with 1/2-inch and 9/16-inch sockets) One Phillips-head screwdriver Rubber mallet (optional, for tapping bolts into place) Household 3-in-1 oil or silicone spray lubricant Component Inventory : Bolt the top horizontal frame member to

Insert the two weight stack guide rods into the holes located on the rear stabilizer base.

Wipe sweat away from the painted steel frame after use to prevent rust.