| Setting | Manual Recommendation | Why | | :--- | :--- | :--- | | | 0.2mm for structural, 0.1mm for detail | Lower heights risk clogging the 0.4mm nozzle below 0.06mm. | | Print Speed | 40-60mm/s (ABS), 50-70mm/s (PLA) | The X-Pro is rigid, but the dual extruder weight limits acceleration. | | Retraction | Distance: 1.5mm, Speed: 25mm/s | Bowden tubes require low retraction to prevent air gaps. | | Cooling Fan | 0% for ABS, 100% for PLA (layer 2+) | The manual emphasizes turning fan OFF for high-temp materials to prevent delamination. |
: Use the touchscreen to heat the nozzle to the required temperature for your material before attempting to load or unload filament [5.13]. qidi x-pro manual