Vestel W6104 Manual Jun 2026

Seal the holes using the plastic blanking caps provided in the accessories bag. Keep these bolts for future relocation. 2. Leveling the Feet Place the appliance on a solid, flat, and non-slip surface.

Periodically pull the drawer completely out by pressing down on the plastic release lever inside the softener compartment. Rinse it under warm water to remove crusty, dried-up detergent residue. Troubleshooting and Error Codes vestel w6104 manual

| Code | Meaning | Solution (from manual) | |------|---------|------------------------| | | Door not closed properly | Open and firmly close the door. Check for obstructions. | | E02 | Water inlet problem | Is the tap open? Is the inlet hose kinked or frozen? Clean inlet filter. | | E03 | Drain issue | Clean the drain pump filter (located behind bottom kick panel). | | E04 | Overfoaming | Too much detergent. Run a rinse cycle without detergent. | | E05 | Motor or tachometer fault | Unplug for 10 minutes. If persists, call service. | | E10 | Heating element problem | Water not heating. Service required. | Seal the holes using the plastic blanking caps

The transit bolts were likely left inside the back panel, or the feet are not adjusted evenly. Re-verify the level on a solid floor surface. Leveling the Feet Place the appliance on a

: 3-star ESMA rating, consuming roughly 118 kWh and 7,020 liters annually.

The official, most reliable source for the Vestel W6104 manual is directly from Vestel itself. Here are the primary methods to obtain a copy: