Jungheinrich Etv 216 Error Codes Today

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

| Code | Meaning | Most Likely Cause | | :--- | :--- | :--- | | | Traction motor temperature sensor | Heavy usage in high ambient temps or low coolant level. | | Fault 115 | CAN-Bus communication error | Loose connector under the dashboard or a dying battery cell. | | Fault 58 | Lift/lower interlock active | Seat bar not fully engaged, or seat switch failure. | jungheinrich etv 216 error codes

: Drive pedal was pressed while the parking brake was still engaged. This public link is valid for 7 days

| Error Code | Description | Possible Causes & Suggested Actions | |:---|:---|:---| | | Steering wheel sensor bearing fault. | This code appears as soon as the steering wheel is touched. Inspect the sensor bearing under the steering wheel, along with all connectors and cables. A common temporary fix is to secure the inner shaft with Loctite, but a full replacement may be necessary [7†L4-L7][30†L10-L13]. | | Error 025 | Lift function error. | A fault in the lift system, potentially related to the elevation potentiometer or a faulty lift unit. Check the hydraulic system and the lift controller [26†L21-L22][26†L25-L26]. | Can’t copy the link right now