Inspect all downstream pipework for slow leaks. Alternatively, install a tiny 2-liter pressure accumulator tank after the controller outlet to absorb micro-pressure losses. 3. Pump Runs Continuously and Will Not Shut Off
The Zenox ZPC-EP1 features a internal terminal block split into power input and pump output connections.
For high-precision applications like flight simulation throttles or position sensors, calibrating your analog inputs ensures pinpoint accuracy. Zenox Zpc-ep1 Manual
Users try the "Flexispot reset" (press M + Up). This will freeze the Zenox handset. If you do this, unplug for 1 hour, then perform the Part 4 reset above.
Always isolate the unit from the 240V main electrical supply before conducting any mechanical inspection, cleaning, or plumbing adjustments. Inspect all downstream pipework for slow leaks
[ Water Outlet ] ▲ │ ┌───────────────┐ │ Zenox ZPC-EP1│ │ [Control │ │ Panel] │ └───────────────┘ ▲ │ [ Water Inlet ] ▲ │ [ Water Pump ] Installation Steps
The front panel of the Zenox ZPC-EP1 features four multi-color diagnostic LEDs to help monitor operational health at a glance. Color/Behavior Operational State Meaning / Required Action Solid Green Device is receiving adequate, stable DC power. PWR Flashing Red Critical Warning Pump Runs Continuously and Will Not Shut Off
: It is designed to prioritize tank water for household supply but will automatically switch to mains water if the tank is empty or if there is a power failure.