The transition from Position 1 to Position 2 must happen within a tight window (usually under 2 seconds). If you pause too long, the control board defaults to standard user operations.
: Ensure the door is closed and the program selector is in the Select Position : Turn the dial to the 6 o'clock position ( Spin/Drain Initiate Command : Press and hold the RPM/Spin Speed bosch serie 6 service mode
The display should clear, or show 0 or P01 to indicate the error memory is erased. Turn the machine to exit the mode. Common Bosch Serie 6 Error Codes Found in Service Mode The transition from Position 1 to Position 2
You followed the steps exactly, but the machine still shows "0.00" instead of "E:00." Here is why: bosch serie 6 service mode