Nokia 105 Rm 908 Usb Pinout ((top)) 〈HIGH-QUALITY - Pack〉

Apply a tiny drop of flux to the RM-908 gold test points. Lightly touch each pad with your soldering iron to leave a small bead of solder on them.

Using your fine-tip iron under magnification, carefully solder the jumper wires from the micro-USB pins directly to their respective components or test points as outlined in the pinout section. Step 5: Insulation and Strengthening Nokia 105 Rm 908 Usb Pinout

Pins 2 and 3 must be jumped to the small golden test points typically located near the center of the PCB or adjacent to the CPU shielding. Pin 2 (D-) connects to the designated D- test pad . Pin 3 (D+) connects to the designated D+ test pad . 3. GND / Ground (Pin 5) Apply a tiny drop of flux to the RM-908 gold test points