Owon Hds2102s Firmware Update Verified |work| Jun 2026

Do not touch the cable or turn off the PC during the progress bar animation. 5. Verify the Update

: Once the progress bar finishes, the device will typically reboot automatically. Press on the device to confirm and finalize the installation. Important Safety Warning Official OWON support has occasionally advised users not to upgrade owon hds2102s firmware update verified

on the oscilloscope after it restarts to confirm the update is complete. Verified Fixes Display Issues : Firmware version is verified to fix a horizontal scaling bug where the Do not touch the cable or turn off

If the update process fails, consider these troubleshooting steps: Press on the device to confirm and finalize the installation

Do attempt to flash any firmware found online without first verifying your unit's current version and hardware generation.

Restart the scope. The bootloader will detect the file, flash itself automatically, and display an "Updating..." graphic on the LCD screen. Step 4: Verification and Post-Update Calibration

: One user attempted a common approach: copying scope.upp to a USB memory stick and using it to update. This method repeatedly failed. OWON support clarified that the HDS200 series devices do NOT support updating via a standard USB memory stick . Instead, they must be connected directly to a PC as a USB drive.