Sinotimer Mc101 Manual Link Info

The terminal block is located on the rear panel of the MC101. Verify your exact sub-model markings before applying power. Power Input Connect to Terminal 1. Connect Neutral to Terminal 2. Control Output (Model Dependent)

The MC101 is part of the MC series (48mm x 48mm size) known for accurate temperature measurement and control. MC101 (48x48mm Panel Size) Measurement Accuracy: Full Scale Resolution: 14-bit Sampling Cycle: 0.5s Input Types: Thermocouple: K, J, R, S, B, E, N, T Thermal Resistance: Pt100, Cu50 sinotimer mc101 manual

What are you trying to control with the timer? Share public link The terminal block is located on the rear panel of the MC101

Connect a bridge wire from Terminal 1 (Live) to Terminal 3 (COM) if you want to output the same voltage. If you are switching a different circuit (e.g., a 12V valve using a 220V timer), connect the external power source to Terminal 3. Connect Neutral to Terminal 2

Note: It is highly recommended to perform a "Reset" before first use. This clears any test data from the factory.