Eme Series 2000 Manual !!hot!! -

In the event of a mechanical jam, smoke emission, or immediate hazard to personnel, depress the nearest red button immediately. The E-stop bypasses the PLC software and instantly cuts power to all kinetic drives via hardware safety relays. Do not reset the E-stop until the root cause of the hazard has been fully identified and rectified. 7. Storage and Decommissioning

Route the web around the spring-loaded tension arm. This arm absorbs the shock of intermittent starts and stops. Pass the web through the label detection sensor slot. Wrap the web around the front of the peel plate. Eme Series 2000 Manual

Mount the labeling head to a heavy-duty H-foot floor stand or directly to the conveyor frame. Vibrations from surrounding machinery must be minimized. In the event of a mechanical jam, smoke